State-certified pool & spa contractor · Lic# CPC1460717 Mon–Sat 9 AM–5 PM · Emergency service · (352) 773-0088

Pool repair in Spring Hill, FLBrooksville, Weeki Wachee and Hernando County

Pump won't start? Leak at the equipment pad? Water won't clear? We find the real problem and fix it, with a state-certified pool contractor on every job.

Get a Repair Quote (352) 773-0088
  • Lic# CPC1460717, licensed & insured
  • Same-day repairs may be possible
  • Emergency service
New diverter valves and plumbing on a pool equipment pad in Spring Hill
Service ticketAvailable
Service
Pool equipment repair
Brands
Pentair · Hayward · Jandy
Turnaround
Same day may be possible
After hours
Emergency service available
See recent projects

A pool specialist, not just a pool guy

Most pool problems start at the equipment pad: the pump, filter, valves, plumbing, heater and the wiring that runs them. That's where we spend most of our time. We diagnose what's actually wrong instead of guessing, and we tell you plainly what it needs.

Sometimes it's a quick fix, like a failed seal or a stuck valve. Sometimes a part is past saving and replacing it makes more sense. Either way you'll know your options before the work starts, and the person you talk to on the phone is the person who shows up to fix it.

Pool Repair

What we repair

  • Pumps & motors

    Pumps that hum, screech, leak, lose prime or won't start. Seals, bearings, motors and full replacements.

    Pool Pump Replacement

  • Leaks & plumbing

    Leaks at the equipment pad, cracked pipe and fittings, broken unions and re-plumbing.

  • Valves

    Stuck, leaking or worn-out valves replaced so water goes where it should.

  • Filters

    Pressure that keeps climbing, cracked tanks, torn cartridges and filters that won't clear the water.

    Equipment Installation

  • Heaters & heat pumps

    Troubleshooting, display and control boards, sensors, and flow problems that keep the heater off.

    Heaters & Heat Pumps

  • Electrical & controls

    Tripping breakers, timers, equipment wiring and automation that stopped talking to the equipment.

    Pool Automation

  • Salt systems

    Salt cells that stopped making chlorine, error lights and scaled-up cells.

    Saltwater Systems

  • Lights

    Pool and spa lights that quit, flicker or trip the breaker, and LED upgrades.

    Equipment Installation

Troubleshooting

What's your pool doing?

Here's what the most common symptoms usually point to. Every pool is different, so we always confirm the cause before we fix anything.

Equipment down right now? Emergency and after-hours service is available. Call (352) 773-0088
SymptomPump hums but won't start

Usually meansOften a failed capacitor, seized motor bearings or something jamming the impeller. Sometimes it's a quick fix. On an older pump, it may be time for a new variable-speed pump.

SymptomPump is loud or screeching

Usually meansWorn motor bearings. A pump that's running dry or sucking air can also get loud. Don't let it run like that for long.

SymptomWater leaking at the equipment pad

Usually meansA worn pump shaft seal, a cracked union or fitting, or a leaking valve. Small leaks get bigger, and water dripping on a motor shortens its life.

SymptomWeak flow or the pump keeps losing prime

Usually meansFull baskets, a clogged impeller, an air leak on the suction side (like a worn lid O-ring or valve), or low water level.

SymptomFilter pressure keeps climbing

Usually meansA dirty or worn-out filter, or a restriction after the filter. If cleaning doesn't bring it down, the filter may need replacing.

SymptomBreaker keeps tripping

Usually meansA motor shorting out, a wiring problem or water where it shouldn't be. Leave it off and call us.

SymptomHeater or heat pump won't heat

Usually meansLow water flow, a flow switch, a sensor or a control board, and we fix all of those. If it turns out to be a refrigerant or gas burner problem, we'll let you know and go over your options, including a new unit if that makes more sense.

Projects

Recent pool repair jobs

Real jobs from around Hernando County. Every photo is from a Knockout job.

See all projects

Real photos

More from recent jobs

Before and after of old pool valves replaced with new diverter valves
Old valves swapped for new diverter valves
Before and after of a rusted pool pump motor replaced with a new one
A rusted-out pump motor replaced

How it works

Three simple steps

  1. Call or send the form

    Tell us what the equipment is doing (or not doing). A photo of the equipment pad helps.

  2. Diagnosis

    Know what you need, like a new pump? The quote is free. Not sure what's wrong? We schedule a diagnostic service call and find the cause.

  3. Fixed and running

    The repair gets done right, and we make sure everything is running before we leave. Same-day repairs may be possible.

Reviews

What customers say

5.0
from 24 Google reviews

  • I had a great experience with Knockout Pool and Spa Care LLC and would highly recommend them to anyone. As a local realtor, I rely on dependable vendors, and they truly delivered. They came out quickly and addressed several issues one of my clients was having with their pool. They were very friendly, knowledgeable…

    Bebo & DakotaGoogle review · Spring Hill · Repairs for a realtor’s client

  • Very quick response, was able to come out same day! Very pleasant and knowledgeable. Will definitely use and recommend Knock Out Pools and Spa!!!!!

    Tracey B.Google review · Spring Hill · Same-day service

  • I have known Brent for over 5 years. He is an outstanding pool technician. From troubleshooting issues with pool equipment or cleaning and maintaining my pool, the results are always outstanding. He is reliable and you can trust that he will do his best. Recommend him for your pool service.

    Tracey J.Google review · Brooksville · Equipment troubleshooting
Read more reviewsLeave us a Google review

Questions

Pool Repair FAQ

How does pricing work for repairs?
Every job is quoted. If you already know what you need, like a new pump or filter, the quote is free. If something isn't working and you're not sure why, we schedule a diagnostic service call, find the problem, and go over your options with you.
How fast can you come out?
Same-day repairs may be possible. Emergency and after-hours service is available (after-hours rates apply). Call (352) 773-0088.
Do you warranty your repairs?
Yes. Parts are covered by the manufacturer's warranty, and our work is backed for 90 days.
Do you work on equipment you didn't install?
Yes. We repair all major brands, including Pentair, Hayward and Jandy, no matter who installed them.

More questions and answers

Related services

Often needed together

All services

Equipment down?

Let's get it running again.

Mon–Sat 9 AM–5 PM. Emergency and after-hours service available.

Get a Repair Quote (352) 773-0088
Call Get a Quote